1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the right luggage side trim.
(Refer to Body - "Luggage Side Trim")
|
3. |
Disconnect the connector from the AC inverter unit.
|
4. |
Remove the AC inverter unit (A) after loosening the mounting nuts
(3EA).
|
General Inspection
After or before servicing the EPS system, perform the troubleshooting
and test procedure as follows. Compare the system condition with normal condition
in the table below and if abnormal symp ...
TJ Joint Installation
1.
Wrap tape around the driveshaft spline(TJ) to prevent damage to
the boot.
2.
Using the alignment marks (D) made during disassembly as a ...
Power Door Lock Switch Diagnosis With GDS
1.
It will be able to diagnose defects of door lock with GDS quickly.
GDS can operates actuator forcefully, input/output value monitoring
and self diagnosis.
...