Kia Sorento: Specifications
| Items |
Specifications |
| Rated voltage |
DC 12V |
| Operating temperature range |
-22 ~ +176°F (-30°C ~ +80°C) |
| Rated load |
Dimmer & passing switch |
High : 1.0A (Relay load) Low : 1.0A (Relay load) Passing : 1.0A (Relay load) |
| Lighting switch |
Lighting : 1.0A (Relay load) |
| Turn signal switch |
6.6 ± 0.5A (Lamp load) |
| Wiper & mist switch |
Low, High : 4.0A (Motor load) Intermittent : 0.22 ± 0.05A (Relay load) Lock : Max. 28A (Motor load) Mist : 4.0A (Motor load) Washer : 4.0A (Motor load) |
| Front fog lamp switch |
1.0A (Relay load) |
| Rear wiper & washer |
Wiper : 0.2A (Relay load) Washer : 4.0A (Motor load) |
Component
...
See also:
Engine Control Module (ECM) Adjustment
•
After replacing the ECM of the vehicle with the immobilizer, the
following procedure must be performed.
1)
[If installing a used ECM]
...
Fuel Filter Installation
1.
Install in the reverse order of removal.
...
Side Body A
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
...
Copyright © www.ksmanual.com 2014-2024