Kia Sorento: Circuit Diagram

Component Location

1. Auto light sensor 2. Head lamps 3. Lighting switch (Auto) 4. Tail lamps 5. IPM (Intelligent intergrated Platform Module) ...

Auto Light Switch Inspection

Operate the auto light switch, then check for continuity between terminals of multi-function switch connector. ...

See also:

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV termi ...

Sub Frame Removel
1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Power Window Motor Inspection
Front Power Window Motor 1. Remove (-) negative battery terminal. 2. Remove the front door trim. (Refer to Body - "Front door&q ...