Kia Sorento: Auto Head lamp leveling Unit Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Head lamp leveling Device / Auto Head lamp leveling Unit Removal
Height Sensor & Unit
| 1. |
Disconnect the negative(-) battery terminal.
|
| 2. |
Remove the height sensor connector (A).
|
| 3. |
Loosen the mounting bolts (2EA) from height sensor bracket after
removing the linkage (A).
|
| 4. |
Remove the height sensor.
|
Auto Head lamp leveling Unit Operation
Operating Procedure
1.
Suspension angle change resulted from vehicle's load change.
2.
Height sensor signal change
...
Auto Head lamp leveling Unit Installation
Height Sensor & Unit
1.
Install the height sensor.
2.
Connect the connector.
...
See also:
Description
An inverter is a device that transforms the DC voltage from the battery
into an AC voltage (115 V). The inverter can power various electrical devices
that consume 150 W or less, including mob ...
General
1.
Basically, all measurements in this manual are taken with a tracking
gauge.
2.
When a measuring tape is used, check to be sure there is ...
Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor
and is installed on the surge tank. It senses absolute pressure of the surge
tank and transfers the analog signal propo ...
Copyright В© www.ksmanual.com 2014-2024