Kia Sorento: Blind Spot Detection Unit Circuit Diagram

Diagnosis With GDS

1. BSD system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis. 2. ...

Blind Spot Detection Unit Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to Body - "Rear Bumper") ...

See also:

Erasing programmed HomeLink buttons
To erase the three programmed buttons (individual buttons cannot be erased): Press and hold the left and center buttons simultaneously, until the indicator light begins to flash (approximately 20 ...

Rear Wheel Speed Sensor Removal
4WD only 1. Remove the rear wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S termi ...