Kia Sorento: Blind Spot Detection Unit Inspection

To sense the cars exactly in the next lane with the radar, the direction of the sensor and the direction of the vehicle have to align.

This is BSD unit alignment. If this alignment is not performed as below illustration, the degradation of detection performance and the cause of false alarms.

The rear bumper accident vehicle and after replacing the BSD unit vehicle have to do this align especially.

Blind Spot Detection Unit Installation

1. Install the BSD units to the rear bumper. 2. Install the rear bumper. 3. Connect the negative (-) battery te ...

Blind Spot Detection Switch Circuit Diagram

...

See also:

Parking Brake Pedal Assembly Installation
1. Install the holding clip (A, B) after fixing the parking brake cable. 2. Install the parking brake pedal, and then install the p ...

Rear Door Components
1. Door inside handle cap 2. Door trim 3. Door belt inner weatherstrip 4. Door module 5. Door panel 6. Door belt weatherstrip 7. Door body side weatherstrip 8. Door ...

Blower Unit Components
1. Intake Case (LH) 2. Intake Case (RH) 3. Intake Door 4. Cowl Seal 5. NVH Seal 6. Blower Upper Case 7. Cluster Ionizer 8. Blower Lower Case 9. Power Mosfet (DAT ...