1. |
Install the AC switch.
|
2. |
Install the console upper cover and console upper tray.
|
3. |
Connect the negative (-) battery terminal.
|
Erasing programmed HomeLink buttons
To erase the three programmed buttons (individual buttons cannot be erased):
Press and hold the left and center buttons simultaneously, until the indicator
light begins to flash (approximately 20 ...
Inspection
1.
Turn ignition switch OFF.
2.
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
...
Cargo Lamp Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the cargo lamp lens (A) with a flat-tip screwdriver.
3.
...