Kia Sorento: Controller

Rear Blower Resister Replacement

1. Disconnect the negative (-) battery terminal. 2. Remove the rear luggage side trim. (Refer to Body - "Interior Trim") ...

Heater & A/C Control Unit (Manual) Component

Connector Pin Function Connector Pin No Function Connector Pin No Function A 1 Ground B 18 IG ...

See also:

[CVVT System Mode]
(1) Low Speed / Low Load (2) Part Load (3) Low Speed / High Load (4) High Speed / High Load ...

Front Strut Assembly Removel
1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV termina ...