1. |
Remove the cooling fan (A) after loosening the screws (B) from the cooling
assembly.
|
2. |
Remove the fan motor (B) after loosening the screws (A) from the cooling
fan shround.
|
3. |
Install in the reverse order of removal.
|
Inspection
Throttle Position Sensor (TPS)
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output voltage of TP ...
AVN Head Unit Removal
•
Take care not to scratch the center fascia panel and related
parts.
...
Rear Door Components
1. Door inside handle cap
2. Door trim
3. Door belt inner weatherstrip
4. Door module
5. Door panel
6. Door belt weatherstrip
7. Door body side weatherstrip
8. Door ...