Kia Sorento: Engine Control System
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Control / Fuel System / Engine Control System
- OBD-II review
- Components Location
- ECM Terminal And Input/Output signal
- Engine Control Module (ECM) Circuit Diagram
- Engine Control Module (ECM) Removal
- Engine Control Module (ECM) Installation
- ECM Problem Inspection Procedure
- Engine Control Module (ECM) Adjustment
- ETC (Electronic Throttle Control) System
- Manifold Absolute Pressure Sensor (MAPS)
- Intake Air Temperature Sensor (IATS)
- Engine Coolant Temperature Sensor (ECTS)
- Crankshaft Position Sensor (CKPS)
- Camshaft Position Sensor (CMPS)
- Knock Sensor (KS)
- Heated Oxygen Sensor (HO2S)
- Rail Pressure Sensor (RPS)
- Accelerator Position Sensor (APS)
- Fuel Tank Pressure Sensor (FTPS)
- Injector
- Purge Control Solenoid Valve (PCSV)
- CVVT Oil Control Valve (OCV)
- Variable Intake Solenoid (VIS) Valve
- Fuel Pressure Control Valve
- Canister Close Valve (CCV)
Basic Troubleshooting
Basic Troubleshooting Guide
Customer Problem Analysis Sheet
Basic Inspection Procedure
Measuring Condition of Electronic Parts' Resistance
The measured resistance at hig ...
OBD-II review
1. Overview
The California Air Resources Board (CARB) began regulation of On Board
Diagnostics (OBD) for vehicles sold in California beginning with the 1988 model
year. The first phase, O ...
See also:
Cylinder Head Cover Removal
1.
Disconnect the battery negative terminal.
2.
Remove the engine cover.
3.
Remove the air duct and air cleaner ...
Crankshaft Inspection
1.
Check the crankshaft bearing oil clearance.
(1)
To check main bearing-to-journal oil clearance, remove the main
caps and bearing ...
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the ...
Copyright В© www.ksmanual.com 2014-2024