1. |
Connect the GDS on the Data Link Connector (DLC).
|
2. |
Measure the output voltage of the MAPS at idle and IG ON.
|
Engine overheat
If your temperature gauge indicates overheating, you experience a loss of power,
or hear loud pinging or knocking, the engine will probably be too hot. If this happens,
you should:
1.Pull off the r ...
Coolant Refilling And Bleeding
Never remove the radiator cap when the engine is hot. Serious scalding
could be caused by hot fluid under high pressure ...
Room Lamp Inspection
1.
Remove the room lamp assembly then check for continuity between
terminals.
[Sunroof]
[General]
...