Kia Sorento: Oil Pump Description

The oil pump is built-in as a single unit with the 26Brake chamber. Rotation of the pump builds the hydraulic pressure needed for the lubrication of the various parts of the transaxle and operation of the clutch and brakes. The oil also circulates through the torque converter and the cooler.

Component Location

1. Radiator(Automatic transaxle oil cooler) 2. Mounting insulator 3. Valve body cover 4. ATF hose&pipe 5. Automatic transaxle 6. Radiator(Automatic transaxle oil c ...

Oil Pump Component Location

1. Automatic transaxle 2. Oil pump assembly ...

See also:

Battery Removal
1. Disconnect the battery (-) terminal and (+) terminal (A). 2. Remove the battery mounting bracket (B) and the insulation pad and then rem ...

Emergency Fastening Device (EFD) Description
Emergency Fastening Device (EFD) operates as well as Belt Pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on driver and pass ...

Removal
1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). ...