Kia Sorento: Output Speed Sensor Circuit Diagram

Output Speed Sensor Specifications

▷ Type: Hall effect sensor Operation condition (°C)°F ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (1.45~1.9) 0.0571~0.0748 Output voltage (V ...

Output Speed Sensor Signal Waveform

...

See also:

Intake Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuato ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the intake manifold. (Refer to Engine Mech ...

Windshield wipers
Operates as follows when the ignition switch is turned ON. MIST/ : For a single wiping cycle, move the lever to this (MIST/ ) position andrelease it. The wipers will operate continuously if the l ...