Kia Sorento: Rear parking assist system (If equipped) - Features of your vehicle - Kia Sorento XM Owners ManualKia Sorento: Rear parking assist system (If equipped)

Second Generation XM (2011-2024) / Kia Sorento XM Owners Manual / Features of your vehicle / Rear parking assist system (If equipped)

The rear parking assist system assists the driver during backward movement of


The rear parking assist system assists the driver during backward movement of the vehicle by chiming if any object is sensed within a distance of 47 in. (120 cm) behind the vehicle.

This system is a supplemental system and it is not intended to nor does it replace the need for extreme care and attention of the driver. The sensing range and objects detectable by the back sensors are limited. Whenever backing-up, pay as much attention to what is behind you as you would in a vehicle without a rear parking assist system.

WARNING

The rear parking assist system is a supplementary function only. The operation of the rear parking assist system can be affected by several factors (including environmental conditions). It is the responsibility of the driver to always check the area behind the vehicle before and while backing up.

Warning lights
✽ NOTICE - Warning lights Make sure that all warning lights are OFF after starting the engine. If any light is still ON, this indicates a situation that needs attention. Air bag Warning Ligh ...

Operation of the rear parking assist system
Operating condition This system will activate when the indicator on the rear parking assist OFF button is not illuminated. If you desire to deactivate the rear parking assist system, press the re ...

See also:

Front Disc Brake Removal
1. Remove the front wheel & tire. Tightening torque: 88.3 ~107.9 N.m (9.0 ~11.0 kgf.m, 65.1 ~79.6 lb-ft) ...

SRS Control Module (SRSCM) Description
The primary purpose of the SRSCM (Supplemental Restraints System Control Module) is to discriminate between an event that warrants restraint system deployment and an event that does not. The ...

Rear Hub - Carrier Disassembly
1. Remove the hub assembly mounting bolts (A-4ea) from the rear axle carrier (B). Tightening torque: 78.5 ~ 88.3N.m (8.0 ~ 9.0 ...

Copyright В© www.ksmanual.com 2014-2024