1. |
Remove the dust cover(A).
|
2. |
Using the special tool (09546-26000), compress the coil spring
(A).
|
3. |
Remove the self-locking nut (C) from the strut assembly(B).
|
4. |
Remove the insulator, spring seat, coil spring and dust cover
from the strut assembly.
|
Battery Vehicle parasitic current inspection
1.
Turn the all electric devices OFF, and then turn the ignition
switch OFF.
2.
Close all doors except the engine hood, and then lock all d ...
Evaporator Temperature Sensor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater and blower assembly.
(Refer to Heater - "Heater Unit")
...