1. |
Install the ODS equipped seat cushion assembly. (Refer to the
Body group- Seat)
|
2. |
Install the front passenger seat assembly.
(Refer to the Body group - seat)
|
3. |
Reconnect the battery negative cable.
|
4. |
After installing the ODS, confirm proper system operation :
|
Rear Differential Carrier Removal
1.
Remove the rear wheel and tire (A) from rear hub.
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...
Circuit Diagram
...
Rear Glass Defogger Switch Installation
1.
Install the heater control unit.
2.
Install the center fascia panel.
...