Kia Sorento: Controller

Rear Blower Resister Replacement

1. Disconnect the negative (-) battery terminal. 2. Remove the rear luggage side trim. (Refer to Body - "Interior Trim") ...

Heater & A/C Control Unit (Manual) Component

Connector Pin Function Connector Pin No Function Connector Pin No Function A 1 Ground B 18 IG ...

See also:

SRS Control Module (SRSCM) Removal
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

Front Strut Assembly Reassembly
1. Install the spring lower pad (D) so that the protrusions(A) fit in the holes (C) in the spring lower seat (B). 2. Compress coil ...

SRS Control Module (SRSCM) Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...