Kia Sorento: Front Strut Assembly Disassembly
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Suspension System / Front Suspension System / Front Strut Assembly Disassembly
| 1. |
Remove the dust cover(A).
|
| 2. |
Using the special tool (09546-26000), compress the coil spring
(A).
|
| 3. |
Remove the self-locking nut (C) from the strut assembly(B).
|
| 4. |
Remove the insulator, spring seat, coil spring and dust cover
from the strut assembly.
|
Front Strut Assembly Removel
1.
Remove the front wheel and tire (A) from front hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...
Front Strut Assembly Inspection
1.
Check the strut insulator for wear or damage.
2.
Check rubber parts for damage or deterioration.
3.
Compress ...
See also:
Replacement
The injector combustion seal should be replaced new one to prevent leakage
after removing the injector.
1.
Remove the combustion seal (A) with a wire cutter.
...
On-vehicle Inpection
•
First of all, check for DTCs. If a DTC is present, perform
troubleshooting in accord ...
Output Speed Sensor Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification :
Refer to "Signal Wave Form" section.
...
Copyright В© www.ksmanual.com 2014-2024