Kia Sorento: Seat & Power Seat

Rear Bumper Replacement

   • Pry the trim off using a plastic trim tool and apply protective tape around the rela ...

Front Seat Replaccement

Seat Assembly Replacement 1. Remove the seat assembly mounting cover. 2. After loosening the seat assembly mounting bolts, remove the seat ...

See also:

Oil Pan Installation
1. Install the oil pan. (1) Using a gasket scraper, remove all the old sealant material from the gasket surfaces. ...

In-car Sensor (DATC only) Description
An in-car air temperature sensor is located in the crash pad lower panel. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance ...

Fuel Filler Cap Description
A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which would seal the fuel filler. After the gasket on the fuel filler cap and the fi ...