1. |
Remove the cap (A) and remove the nuts, then remove the wiper
arm (B).
|
2. |
Disconnect the nozzle hose (B).
|
3. |
Detach the clips, then remove the cowl top cover (A).
|
4. |
Install in the reverse order of removal.
|
Compressor Inspection
1.
Check the plated parts of the disc & hub assembly (A) for color
changes, peeling or other damage. If there is damage, replace the clutch
set.
...
3. TCM Terminal input/ output signal
Connector [A]
Pin No.
Signal
Condition
Type
Level
29
Sports mode up switch
Up ON
Input
0V/Battery voltage level
...
Brake Pedal Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the crash pad lower panel and reinforce panel.
...