Kia Sorento: Windshield Glass Removal
| •
|
Put on gloves to protect your hands.
|
| •
|
Use seat covers to avoid damaging any surfaces.
|
|
|
1. |
Remove the following parts.
| B. |
Inside rear view mirror
|
| C. |
Rain sensor
(Refer to "Rain Sensor" in BE group)
|
| D. |
LDWS unit
(Refer to "LDWS Unit" in BE group)
|
| E. |
Auto defog sensor
(Refer to "Auto Defog Sensor " in HA group)
|
| H. |
Windshield glass deicer connector
(Refer to "Windshield Deicer" in BE group)
|
|
|
2. |
Using a screwdriver or remover, remove the windshield moulding
(A).
|
|
3. |
Cut out the sealant using the sealant cutting tool (09861-31100).
|
|
4. |
Remove the windshield glass (B) carefully using the glass holder
(A).
|
1. Windshield side moulding
2. Windshield glass
...
1.
With a knife, scrape the old adhesive smooth to a thickness of
about 2mm (0.08 in.) on the bonding surface around the entire windshield
opening flange :
...
See also:
Circuit Diagram
Circuit Diagram (2)
Circuit Diagram (3)
...
Power Door Mirror Switch Installation
Driver Door Mirror Switch
1.
Install the driver door module and connectors.
2.
Install the front door trim.
...
Troubleshooting
Ignition System
Symptom
Suspect Area
Remedy
Engine will not start or is hard to
start (Cranks OK)
Ignition lock switch
Inspect ignition ...
Windshield Glass Components
Windshield Glass Installtion