Kia Sorento: Rear Bumper Components - Bumper - Body (Interior and Exterior) - Kia Sorento XM 2011-2025 Service ManualKia Sorento: Rear Bumper Components

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Body (Interior and Exterior) / Bumper / Rear Bumper Components

1. Rear bumper cover
2. Rear bumper lower bracket [RH]
3. Rear bumper lower bracket [LH]
4. Rear bumper side bracket [RH]
5. Rear bumper side bracket [LH]

Front Bumper Replacement
   • Pry the trim off using a plastic trim tool and apply protective tape around the rela ...

Rear Bumper Replacement
   • Pry the trim off using a plastic trim tool and apply protective tape around the rela ...

See also:

Tire replacement
If the tire is worn evenly, a tread wear indicator will appear as a solid band across the tread. This shows there is less than 1/16 inch (1.6 mm) of tread left on the tire. Replace the tire when t ...

Under Body (2WD)
Projected Dimensions * These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Actual-Measurement Dimensions ...

Immobilizer system (if equipped)
Your vehicle is equipped with an electronic engine immobilizer system to reduce the risk of unauthorized vehicle use. Your immobilizer system is comprised of a small transponder in the ignition key ...

Copyright © www.ksmanual.com 2014-2025