1. |
Remove the rear roof trim.
(Refer to Body - "Roof trim")
|
2. |
Disconnect the power cable (A).
|
3. |
Disconnect the connectors (A) from the roof antenna.
|
4. |
Remove the roof antenna (B) after removing a nut (A).
|
Troubleshooting Guide
Before Thinking The Product Has Malfunctioned
1.
Errors which occur during the operation or installation of the
device may be mistaken as a malfunction of the actual de ...
Valve Body Removal
1.
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
2.
Remove the battery and the battery tray.
...
Limp Home Function
1.
Limp Home By Tester
If the PCM(ECM) detects the fault of the SMARTRA or transponder,
the PCM(ECM) will allow limp home function of the immobilizer. Limp
hom ...