1. |
Remove the negative (-) battery terminal.
|
2. |
Remove the front seat assembly.
(Refer to Body - "Front Seat")
|
3. |
Remove the IMS module (B) after disconnecting the connector (A)
and loosening the screws (3EA).
|
Using a child restraint system
For small children and babies, the use of a child seat or infant seat is required.
The child seat or infant seat should be of appropriate size for the child and should
be installed in accordance w ...
Relay Box (Passenger Compartment) Installation
1.
Install IPM(Intelligent intergrated Platform Module).
2.
Connect the IPM connector.
3.
Install the crash pad ...
Troubleshooting
Ignition System
Symptom
Suspect Area
Remedy
Engine will not start or is hard to
start (Cranks OK)
Ignition lock switch
Inspect ignition ...