Kia Sorento: IMS Power Seat Control Circuit Diagram

IMS module Installation

1. Install the IMS module after reconnecting the connector. 2. Install the driver seat.    ...

IMS Power Seat Control Inspection

1. With the power seat switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the power seat ...

See also:

Air Ventilation Seat Control Unit Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the air ventilation seat control unit (A) after loosening screws. ...

Specifications
Direct control VFS[LINE Pressure] ▷ Control type : Normal high type Control Pressure kpa (kgf/cm², psi) 539.370 ~ 0 ( 5.5 ~ 0, 78.23 ~ 0) Current va ...

IPM Installation
1. Install IPM(Intelligent intergrated Platform Module). 2. Connect the IPM connector. 3. Install the crash pad ...