1. |
Install the power seat control switch after connecting the connector.
|
Engine Mounting Removal and Installation
Roll road Bracket
1.
Remove the roll road bracket(A).
Tightening torque
Bolt (B) :
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ...
Removal
1.
Disconnect the battery negative cable from the battery and then
wait for at least 30 seconds.
2.
Turn the steering wheel so that the fr ...
Troubleshooting
Symptom
Probable cause
Remedy
play in steering
Loose yoke plug
Retighten
Loose steering gear mounting bolts
Retighten
L ...