1. |
Remove the driver / assist seat back heater (A) and cushion heater
(B).
(Refer to Body - "Front seat")
|
2. |
Remove the rear seat LH heater (A) and RH heater (B).
(Refer to Body - "Rear seat")
|
Anti-Pinch Strip Removal
1.
Disconnect the negative (-) battery terminal.
2.
After loosening the mounting screws, then remove the tailgate
side trim (A).
(R ...
Limp Home Function
1.
Limp Home By Tester
If the PCM(ECM) detects the fault of the SMARTRA or transponder,
the PCM(ECM) will allow limp home function of the immobilizer. Limp
hom ...
Opening the fuel filler lid
The fuel filler lid must be opened from inside the vehicle by pressing the fuel
filler lid opener button on the driver’s door. (if equipped)
✽ NOTICE
If the fuel filler lid does not open ...