Kia Sorento: Fuel Filler Door Release Actuator Inspection
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Fuel Filler Door / Fuel Filler Door Release Actuator Inspection
| 1. |
Remove the fuel filler cover (A) after loosening screws (2EA).
|
| 2. |
Remove the fuel filler door module (A).
|
| 3. |
Remove the rear 3rd seats.
(Refer to Body - "Rear seats")
|
| 4. |
Remove the luggage side trim.
(Refer to Body - "Interior trim")
|
| 5. |
Disconnect the fuel filler door release actuator connector (A).
|
| 6. |
Check for continuity between terminal No. 1 and No. 2. If there
is no continuity, replace the fuel filler door release actuator (A).
|
Component Location
1. Fuel filler door open switch
2. Fuel filler door release actuator
...
Fuel Filler Door Open Switch Inspection
1.
Remove the front door trim panel.
(Refer to Body - "Front door")
2.
Disconnect the switch connector (A) from wiring.
...
See also:
Front Body B
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
...
[CVVT System Mode]
(1) Low Speed / Low Load
(2) Part Load
(3) Low Speed / High Load
(4) High Speed / High Load
...
Power Tailgate Latch Inspection
Power Tailgate Inspection With GDS
1.
Check the power Tailgate module input/output value by using the
GDS. If the operation of power Tailgate module is abnormal, replac ...
Copyright В© www.ksmanual.com 2014-2024