1. |
Remove the front door trim and power door mirror switch module
(A).
(Refer to Body - "Front door")
|
2. |
Check for the continuity between terminals of power door mirror
switch according to the table.
|
Brake Line Removal
1.
Disconnect the brake fiuid level switch connector, and remove
the reservoir cap.
2.
Remove the brake fluid from the master cylinder rese ...
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the crankshaft position sensor connector (A).
...
Air Ventilation Seat Installation
1.
Install the blower fan.
2.
Install the seat back and cushion.
...