Kia Sorento: Power Windows

Power Door Mirror Actuator Inspection

1. Disconnect the negative (-) battery terminal. 2. Remove the driver door module. (Refer to Body - "Front door") ...

Component Location

1. Driver power window main switch 2. Passenger window switch 3. Front window motor 4. Rear window motor 5. Rear window switch ...

See also:

In-car Sensor (DATC only) Description
An in-car air temperature sensor is located in the crash pad lower panel. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance ...

Emergency Fastening Device (EFD) Description
Emergency Fastening Device (EFD) operates as well as Belt Pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on driver and pass ...

Inspection (With GDS)
1. Check IPM input/output specification of multifunction switch using the GDS. If the specification is abnormal, replace the lamp or wiper switch. ...