Kia Sorento: Windshield Wiper-Washer Switch Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Windshield Wiper/Washer / Windshield Wiper-Washer Switch Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the steering column upper and lower shrouds (A) after loosening
3 screws.
|
| 3. |
Remove the wiper switch (A) with pushing the lock pin (C) after
disconnecting the connector (B).
|
Component Location
1. Windshield wiper arm & blade
2. Wiper & washer switch
3. Windshield washer hose
4. Windshield wiper motor & linkage
5. Washer motor
6. Washer reservoir
...
Windshield Wiper-Washer Switch Installation
1.
Install the windshield wiper switch.
2.
Connect the wiper switch connector.
3.
Install the steering column u ...
See also:
Power Tailgate Latch Installation
1.
Install the power tailgate latch & PCU assembly.
2.
Install the tailgate trim.
3.
Connect the negative ( ...
Component Location
1. Rear wiper arm & blade
2. Tailgate glass hole
3. Grommet
4. Rear wiper arm nut
5. Rear wiper motor assembly
6. Head cap
7. Rear wiper motor bolt
...
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the variable intake solenoid valve connector ( ...
Copyright В© www.ksmanual.com 2014-2024