Kia Sorento: Rear Washer Switch Inspection

Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and wiper switch.

Rear Wiper Motor Installation

1. Install the rear wiper motor assembly. Tightening torque Nut : 7 ~ 11 N.m (0.7 ~ 1.1 kgf.m, 5 ~ 7.9 lbf-ft) ...

Rear Washer Motor Inspection

1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water.    ...

See also:

Pressure Sensor Description
The 4WD ECU makes a Motor Pump(Actuator) turn round for generating an oil pressure. And then it presses a multiple disk clutch and transfers the generated torque into rear wheels. Its torque ...

Manual climate control system (If equipped)
1. Fan speed control knob 2. Mode selection knob 3. Temperature control knob 4. Air conditioning button 5. Air intake control button 6. 3rd row air conditioning ON/OFF button (controlled from t ...

Troubleshooting
Trouble Symptom Probable cause Remedy Vehicle pulls to one side Scoring of driveshaft ball joint Replace Wear, rattle or scoring of wheel b ...