Kia Sorento: Door Mood Lamp Installation - Lighting System - Body Electrical System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Door Mood Lamp Installation

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Lighting System / Door Mood Lamp Installation

1.
Install the door mood lamp and connector.
2.
Install the front door trim.
3.
Connect the negative battery terminal.
Door Mood Lamp Removal
1. Disconnect the negative battery terminal. 2. Remove the front door trim. (Refer to Body - "Front door") ...

Hazard Lamp Switch Removal
   • Put on gloves to protect your hands. ...

See also:

Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal propo ...

Front Stabilizer Bar Removel
1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Front Body A
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] ...

Copyright В© www.ksmanual.com 2014-2024