Kia Sorento: Blind Spot Detection Switch Removal - Blind Spot Detection System - Body Electrical System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Blind Spot Detection Switch Removal

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Blind Spot Detection System / Blind Spot Detection Switch Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad")
3.
Remove the crash pad side switch assembly (A) after loosening the mounting screws.

Blind Spot Detection Switch Circuit Diagram
...

Blind Spot Detection Switch Installation
1. Install the crash pad side switch assembly after connecting the connector. 2. Install the crash pad lower panel. ...

See also:

Cooling Fan Control Module Circuit Diagram
...

Rear Hub - Carrier Removal
1. Remove the front wheel and tire (A) from front hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Description
System Outline An optimal seat position set by a driver can be memorized in Power seat unit by IMS SW, which enables restoration of seat position set by the driver despite Pl ...

Copyright В© www.ksmanual.com 2014-2024