1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the right luggage side trim.
(Refer to Body - "Luggage Side Trim")
|
3. |
Disconnect the connector from the AC inverter unit.
|
4. |
Remove the AC inverter unit (A) after loosening the mounting nuts
(3EA).
|
Direct Electro Hydraulic Actuator Coupling Operation
Electronic Coupling
[Inactive]
[Active]
Operation Order
1.
4WD ECU receives CAN signals from the vehicle's sensors.
...
Antenna Removal
1.
Remove the rear roof trim.
(Refer to Body - "Roof trim")
2.
Disconnect the power cable (A).
3. ...
Engine Mounting Removal and Installation
Roll road Bracket
1.
Remove the roll road bracket(A).
Tightening torque
Bolt (B) :
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ...