1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the rear console cover.
(Refer to Body - "Console")
|
3. |
Remove the power outlet switch (A) from the rear console cover.
|
Auto Head lamp leveling Unit Inspection with GDS
Initialization and diagnosis sequence by using GDS equipment.
Below content summarize the procedure for A/S using GDS.
No.
Procedure
1
Locate vehicle to flat ...
Front Wheel Transfer Assembly Removal
It is not recommended to overhaul the transfer assembly because
a special three-dimensional measuring instrument is requ ...
Oil Cooler Installation
1.
Apply a light coat of engine oil to the oil cooler packing surface (A),
and then install the oil cooler with fix bolt (B).
Tightening torque:
...