Kia Optima Manuals

Kia Sorento: In-car Sensor Inspection - Air conditioning System - Heating,Ventilation And Air Conditioning - Kia Sorento XM 2011-2025 Service ManualKia Sorento: In-car Sensor Inspection

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / In-car Sensor Inspection

1.
Turn the ignition switch ON.
2.
Blow air with changing temperature into the in-car sensor air inlet. Measure the sensor resistance between 1 and 2 terminals.

1. Incar Motor(-)
2. Sensor Ground
3. -
 4. Incar Sensor (+)
5. -
6. IGN2 (Motor (+))

Specification
Temperature [°C(°F)]
 Resistance between terminals 2 and 4 (kΩ)
0 (32)
 97.71 ± 2.61%
15(59)
 47.12 ± 1.45%
25(77)
 30.00 ± 1.2%
35(95)
 19.60 ± 1.44%
50(122)
 10.82 ± 2.26%

  
An in-car sensor is a negative type thermistor. The resistance will rise with lower temperature, and reduce with higher temperature.
In-car Sensor (DATC only) Description
An in-car air temperature sensor is located in the crash pad lower panel. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance ...

In-car Sensor Replacement
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the center fascia panel (A). ...

See also:

Overdrive Clutch Control Solenoid Valve(OD/C_VFS)
Overdrive clutch control solenoid valve(OD/C) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the overdrive clutch. ...

Component Location
1. Slide motor 2. Front height motor 3. Rear height motor 4. Lumber support motor 5. Power seat switch 6. Reclining motor 7. Reclining switch 8. Lumber support swit ...

Description
Automatic transaxle system relies on various measurement data to determine the current control status and extrapolate the necessary compensation values. These values are used to control the a ...

Categories


Copyright © www.ksmanual.com 2014-2025