Kia Sorento: Auto Defogging Actuator Description

The auto defogging sensor is installed on front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives a signal from the sensor and restrains moisture and eliminates defog by the intake actuator, A/C, auto defogging actuator, blower motor rpm and mode actuator.

Mode Control Actuator Replacement

1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the driver's side crash pad side cover. ...

Auto Defogging Actuator Inspection

1. Turn the ignition switch OFF. 2. Disconnect the auto defogging connector. 3. Verify that the auto defoggin ...

See also:

Hazard Lamp Switch Removal
   • Put on gloves to protect your hands. ...

Front Impact Sensor (FIS) Installation
   • Do not turn the ignition switch ON and do not contact the battery cable while replac ...

Audio Remote Control Installation
1. Install the audio remote control switch on the steering wheel front cover. 2. Install the steering wheel front cover. ...