1. |
Disconnect the negative (-) battery terminal.
|
2. |
Using a screwdriver or remover, remove the center fascia panel
(A).
|
3. |
Disconnect the clock connector (A).
|
4. |
Disconnect the heater and A/C controller connectors (A).
|
5. |
Remove the heater & A/C controller (A) from the center facia after
loosening the mounting screws.
|
6. |
Install in the reverse order of removal.
|
Timing Chain Cover Removal
•
Use fender covers to avoid damaging painted surfaces.
•
...
ATF Warmer Description
The ATF warmer is mounted on the valve body cover to reduce oil viscosity
friction by increasing oil temperature under cold condition, which in turn improves
fuel efficiency. It is serial mou ...
SRS Control Module (SRSCM) Variant coding
After replacing the SRSCM with a new one, MUST perform the “Variant Coding”
procedure.
1.
...