Kia Sorento: Cylinder Head Components

CVVT & Camshaft Installation

1. Install the intakeCVVT assembly(A), exhaust CVVT assembly(B) and camshaft(C). Tightening torque : 53.9 ~ 63.7 N.m (5.5 ~ 6.5 kgf.m, 39 ...

Cylinder Head Removal

   • Use fender covers to avoid damaging painted surfaces. • ...

See also:

SRS Control Module (SRSCM) Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

Tire replacement
If the tire is worn evenly, a tread wear indicator will appear as a solid band across the tread. This shows there is less than 1/16 inch (1.6 mm) of tread left on the tire. Replace the tire when t ...

Removal
1. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") 2. Remove the battery and the battery tray. ...