Kia Sorento: Components
| 1. Piston ring 2. Snap ring 3. Piston 4. Connecting rod 5. Connecting rod upper bearing |
6. Piston pin 7. Connecting rod lower bearing 8. Connecting rod bearing cap 9. Ladder frame 10. Oil filter bracket 11. Crankshaft rear oil seal |
| 1. Crankshaft upper bearing 2. Thrust bearing 3. Crankshaft |
4. Crankshaft lower bearing 5. Main bearing cap 6. Piston cooling oil jet |
Cylinder Block
...
Drive Plate Removal and Installation
1.
Remove the automatic transaxle .
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the drive plate ( ...
See also:
Rear Bumper Replacement
•
Pry the trim off using a plastic trim tool and apply protective
tape around the rela ...
Transfer Fluid Replacement
Change
Normal Use
Severe Use
No service required
...
Fuel requirements
Your new vehicle is designed to use only unleaded fuel having a pump octane number
((R+M)/2) of 87 (Research Octane Number 91) or higher.
Your new vehicle is designed to obtain maximum performance w ...
Copyright В© www.ksmanual.com 2014-2024