Kia Sorento: Piston and Connecting Rod Components
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Mechanical System / Cylinder Block / Piston and Connecting Rod Components
| 1. Piston ring 2. Snap ring 3. Piston 4. Connecting rod |
5. Connecting rod upper bearing 6. Connecting rod lower bearing 7. Connecting rod bearing cap |
Cylinder Block Reassembly
1.
Install the oil jet (A).
Tightening torque :
24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 18.1 ~ 21.7 lb-ft)
...
Piston and Connecting Rod Disassembly
•
Use fender covers to avoid damaging painted surfaces.
•
...
See also:
Power Tailgate Latch Installation
1.
Install the power tailgate latch & PCU assembly.
2.
Install the tailgate trim.
3.
Connect the negative ( ...
Rear Hub - Carrier Removal
1.
Remove the front wheel and tire (A) from front hub.
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...
Installation
•
Install the component with the specified torques.
•
...
Copyright © www.ksmanual.com 2014-2024