Kia Sorento: Oil Level Gauge & Pipe Removal and Installation
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Mechanical System / Lubrication System / Oil Level Gauge & Pipe Removal and Installation
| 1. |
Remove the oil gauge(A).
|
| 2. |
Remove the intake manofold.
(Refer to Intake And Exhaust System - "Intake Manifold")
|
| 3. |
Remove the oil level pipe(A).
|
| 4. |
Install in the reverse order of removal.
|
Oil Pressure Switch Inspection
1.
Check the continuity between the terminal and the body with an ohmmeter.
If there is no continuity, replace the oil pressure switch.
2.
...
See also:
Fuel Line Removal
1.
Turn the ignition switch OFF, and then remove battery (-) cable.
2.
Release the residual pressure in fuel line.
(Refer to the F ...
Lane Departure Warning System (LDWS) Unit Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the LDWS unit cover (A).
3.
Remove the LDWS ...
Inspection
Throttle Position Sensor (TPS)
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output voltage of TP ...
Copyright В© www.ksmanual.com 2014-2024