Kia Sorento: Air Cleaner Removal and Installation

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Engine Mechanical System / Intake And Exhaust System / Air Cleaner Removal and Installation

1.	Remove the engine cover.

2.	Remove the air duct (A).

3.	Remove the battery. (Refer to Engine Electrical System - "Battery")

4.

Remove the air cleaner assembly.

(1)	Disconnect the breather hose (A), the intensifier hose (B).

(2)	Disconnect the air intake hose (C) and then remove the air cleaner assembly (D).

5.	Install in the reverse order of removal.

Air Cleaner Components

1. Air duct 2. Air cleaner body 3. Air cleaner element 4. Air cleaner cover 5. Air intake hose 6. Clamp 7. Air intake shield ...

Intake Manifold Components

1. Intake manifold assembly 2. Electronic throttle body 3. Intake manifold stay 4. Intake manifold gasket ...

See also:

Oil hydraulic Motor(Actuator) Description
The 4WD ECM controls the Pump Motor Pump (Actuator) to generating an oil pressure. The pressure engages a multiple disk clutch to transfer torque to the rear wheels. The torque to the rear wh ...

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV termi ...

Output Speed Sensor Specifications
▷ Type: Hall effect sensor Operation condition (°C)°F ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (1.45~1.9) 0.0571~0.0748 Output voltage (V ...

Categories

Copyright © www.ksmanual.com 2014-2025