Kia Sorento: Inspection
| 1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
| 2. |
Disconnect the fuel pressure regulator valve connector.
|
| 3. |
Measure resistance between the fuel pressure regulator valve terminals
1 and 2.
|
| 4. |
Check that the resistance is within the specification.
|
Circuit Diagram
...
Canister Close Valve (CCV)
Canister Close Valve (CCV) is installed on the canister ventilation line.
It seals evaporative emission control system by shutting the canister from the
atmosphere when leakage detecting syst ...
See also:
Vehicle break-in process
No special break-in period is needed. By following a few simple precautions for
the first 600 miles (1,000 km) you may add to the performance, economy and life
of your vehicle.
Do not race the e ...
Fuel Pump Removal
1.
Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - Repair Procedures - "Release
Residual Pressure in Fuel Line")
...
Specification
[Throttle Position Sensor (TPS)]
Throttle Angle(°)
Output Voltage(V)
TPS1
TPS2
0
0.0
5.0
10
0.48
4.52
...
Copyright © www.ksmanual.com 2014-2024