Kia Sorento: Fuel Tank Installation - Fuel Delivery System - Engine Control / Fuel System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Fuel Tank Installation

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Tank Installation

1.
Install in the reverse order of removal.

Fuel tank band installation bolt:
44.1 ~ 58.8 N.m (4.5 ~ 6.0 kgf.m, 32.6 ~ 43.4 lb-ft)

Fuel Tank Removal
1. Release the residual pressure in fuel line. (Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line") ...

Fuel Pump Inspection
[Fuel pump motor] 1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Remove the fuel pump assembly. ...

See also:

Windshield Wiper-Washer Switch Inspection
Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and wiper switch. Wiper Switch Washer Switch R ...

Windshield Deicer Switch Installation
1. Install the heater control unit. 2. Install the center fascia panel. ...

Front Impact Sensor (FIS) Description
The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of ...

Copyright В© www.ksmanual.com 2014-2024