1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
|
2. |
Disconnect the fuel sender connector (A).
|
3. |
Release the fixing hooks, and then remove the fuel sender (A).
|
4. |
Release the fixing hooks (A), and then fuel filter & motor assembly
from reservoir cup.
|
Component Location
1. Hood switch
2. Burglar horn
3. IPM & RF receiver
4. Key warning switch
5. Front door switch
6. Front door lock actuator & switch
7. Rear door lock actuator ...
If the engine will not start
If engine doesn't turn over or turns over slowly
1.If your vehicle has an automatic transaxle, be sure the shift lever is in N
(Neutral) or P (Park) and the emergency brake is set.
2.Check the ...
4WD ECU Removal
1.
Prior to replacing the 4WD ECU, check the 4WD ECU's clutch learing
with the GDS tool.
(Refer to 4WD Control System - "Repair procedures")
...