Kia Sorento: ATF Warmer Installation - Hydraulic System - Automatic Transaxle System - Kia Sorento XM 2011-2025 Service ManualKia Sorento: ATF Warmer Installation

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Automatic Transaxle System / Hydraulic System / ATF Warmer Installation

1.
Install in the reverse order of removal.
  
•
Adding automatic transaxle fluid.
(Refer to Hydraulic System - "Fluid")
•
Adding coolant.
(Refer to Engine Mechanical System - "Coolant")
ATF Warmer Removal
1. Drain the coolant. (Refer to Engine Mechanical System - "Coolant") 2. Remove the air cleaner assembly and air duct. ...

Clutch & Brake
...

See also:

Overhead Console Lamp Inspection
Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch. ...

Component Location
1. Windshield deicer relay 2. Windshield deicer switch 3. Windshield deicer 4. Deicer connector ...

High Pressure Fuel Pump Installation
   • Be sure to check the low pressure fuel hose quick-connector (A) is completely connec ...

Copyright © www.ksmanual.com 2014-2025