Wheel Hub nut tightening sequence
Tighten the hub nuts as follows.
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Compressor Oil Specification
1.
The HFC-134a system requires synthetic (PAG) compressor oil whereas
the R-12 system requires mineral compressor oil. The two oils must never
be mixed.
...
Blade inspection
✽ NOTICE
Commercial hot waxes applied by automatic vehicle washes have been known to
make the windshield difficult to clean.
Contamination of either the windshield or the wiper blades with ...