Kia Sorento: Rear Hub - Carrier Components

Rear Axle Assembly

...

Rear Hub - Carrier Removal

1. Remove the front wheel and tire (A) from front hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

See also:

Emergency Fastening Device (EFD) Removal
1. Disconnect the battery negative cable, and wait for at least thirty seconds before beginning work. 2. Remove the EFD cover pad (A). ...

Master Cylinder Components
1. Reservoir cap 2. Reservoir 3. Grommet 4. Master cylinder ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the connector (A), and then remove the sensor ...